Antennas
Antennas
88 results found:
4002ALM-6 Universal Trip Amplifier
£274.77
The 4002ALM-6 has been designed to perform virtually any Trip Amplifier function 'out of the box'.
With input types including mA, volts, thermocouples and RTD's and others and a re-transmitted 4-20mA or voltage output as standard, the 4002ALM-6 has every feature required built-in as standard.
Functions such as latching, delay on, delay off and power on delays can all be called up from the built-in menus, no PC software or programming is required.
The power supply can be anything from 16 to 30Vdc.
For AC Powered applications a DPP30-24 PSU may be used
£110.00
The CTX range are 0-10Vdc or 4-20mA output current transformers with a range of inputs from 0-2A up to 0-200A ac.
Each instrument has three different input ranges which are user-selectable. The CTX can be ordered as standard ring or split-ring cores, the split ring option allows installation without the disconnection of the existing wiring.
£19.00
The DSP10-24 is a 10W Power supply with a universal input and 24Vdc output.
The unit is housed in a compact DIN rail enclosure. The input voltage range is 90 to 264 Vac and other power options are available.
E-100 Analogue I/O Communications Gateway
£338.02
The E-100 Analogue to Communications module provides an easy way of interfacing analogue and digital process parameters to an Ethernet or RS232or RS485 network. The E-100 has one universal analogue input built-in but can be expanded through the use of the Isoslice range of I/O modules.
the built-in display allows easy local monitoring of any of the input parameters.
The default communications Port is an RS485 port other options are shown below.
Fixture Monitoring System Receiver
£2,390.00
The FMS-000 monitors wireless transmitters embedded in CNC Fixtures and produces alarm relay and communication outputs to allow the CNC machine to take the necessary action on the detection of any change in clamping pressure.
The system has been fitted connected to many different manufacturers machines including: Hermle, Mazak, DMG Mori and Okuma.
£257.00
The II-L001 is a detachable, submersible level transmitter with several unique features which make it ideal for a wide range of industrial applications.
Standard outputs include mA, volts and mV. Accuracie can be specified between 0.25% to an exceptional 0.05% BFSL.
IIP-DISP Pressure Transmitter with Display
£227.00
The IIP-DISP is a 4-20mA pressure transmitter with a built in Display and Relay outputs.
The unit can display ranges from 0.6 bar to 600 bar, transmit a 4-20mA output and have two relay outputs.
Suitable for most media types as standard custom options are available for food applications and more agressive fluids.
£285.00
Our Industrial IoT Starter kits are designed to give our customers a quick and easy pathway to a fully featured operational IoT System.
Kits comprise of the following parts:
IoT Gateway with wireless receiver & Cellular modem
Any 2 IWPT Wireless pressure transmitters
Access to IoT software platform
'Out the Box' quick start guide
£442.34
The IoT-Gateway is a wall mounting wireless receiver which collects data from IWT wireless sensors which can then be sent to any cloud-based server
The IoT Gateway can also have a local display which allows all the parameters from the wireless sensors such as value, link quality and update time, to be viewed locally.
Housed in a wall mounted IP65 enclosure the IoT Gateway can monitor up to 128 IWT wireless transmitters along with 4 off analogue inputs, 8 off digigal inputs and Modbus registers from external equipment using its built-in RS485 Communications Port.
£184.51
The Isocon-6 is a universal input DC powered signal converter with 3-Port Isolation.
The Isocon-6 can accept virtually any input including 4-20mA loops, voltage inputs, thermocouples, PT100 sensors and potentiometers and provides an isolated 4-20mA or Voltage output.
The Isocon-3 is also available if a AC power supply is required.
£182.15
A range of PT100 or thermocouple temperature sensors with built-in 4-20mA transmitters.
they are constructed from 6mm diameter stainless steel sensor elements with aluminium connecting heads containing a programmable 4-20mA transmitter.
Standard process connections are either 1/4" BSP (ITT Range) or 1/4" NPT (ITTU Range) but custom probes to you specification can be supplied too.
A range of off-the-shelf standard sensor lengths are available from 100mm to 400mm with other lengths available to order.
Wireless sensors are also available, please see our IWTT and IWTTU ranges for more details.
IWPT Industrial Wireless Pressure transmitter
£235.16
The IWPT Wireless Pressure Transducer is a cost effective replacement
to a traditionally wired pressure transducer that offers the advantages
of a low-cost installation in inaccessible and expensive installation
environments.
It is easily paired to any of the range of IWR receivers - thus offering
a “plug and play” solution to your pressure measurement applications.
Each device is temperature compensated, calibrated and supplied with
a traceable serial number.
Vibe-Port Wireless Vibration System
£0.00
The VIBE-PORT-Ethernet is a unique vibration system which allows the transmission of standard vibration and temperature sensors to anywhere in the World. The system then re-forms these signals into standard analogue waveforms at the receiver enabling them to be monitored using any Vibration Data Analyser or collector. These files can also be ‘played’ into any suitable analysis software such as LabView or sent to any Cloud-based AI Predictive Maintenance software platform.
£184.51
The 2002ALMHL is a dual setpoint Trip Amplifier which can accept inputs from any mA or voltage source and provides two alarm relay outputs.
The setpoints are adjusted using potentiometers on the front panel and can be measured using a 0-10V signal on the setpoint terminals. The power supply can be 24Vdc or 24Vac and the relay outputs are mains rated.
£38.00
The DPP15-24 is a 15W Power supply with a universal input and 24Vdc output.
The unit is housed in a compact DIN rail enclosure. The input voltage range is 90 to 264 Vac and other power options are available.
£816.49
The FMS wireless transmitter is specially designed to be mounted onto hydraulic or pneumatic CNC fixtures to monitor the clamping pressure during CNC cutting cycles.
Designed to withstand the harsh environment found inside teh cutting area of multi-axis CNC machines the transmitter sends its pressure value wireless to the FMS receiver.
£83.00
The II-P001 pressure transmitter is an industrial pressure transmitter which is suitable for a wide range of applications. Options include mA, voltage or mV outputs and a wide range of process and electrical connections.
Pressure ranges are from 250mB to 700 barg and are available in both gauge or absolute versions.
A level transmitter, the II-L001 is also available.
£285.00
Our Industrial IoT Starter kits are designed to give our customers a quick and easy pathway to a fully featured operational IoT System.
Kits comprise of the following parts:
IoT Gateway with wireless receiver & Cellular modem
Any 2 IWTT Wireless temperature transmitters
Access to IoT software platform
'Out the Box' quick start guide
ISOSLICE-1 2 channel mA or Voltage Input Module
£285.30
The ISOSLICE-1 is an isolated input module which has two universal input channels which can be configured for mA, DC Voltage, thermocouples, RTD sensor and load gauge or strain gauge inputs
The unit has channel-to channel and input to power supply isolation and connects automatically to the E-100,Z-200 Z-PORT or RAMPORT modules allowing a complete I/O system to be achieved.
£331.51
The IWR-PORT wireless Gateway provides a link between IWT wireless
sensors and sensor networks and Industrial Ethernet or RS-232/485
networks.
This allows our range of IWT wireless transmitters to be incorporated into
new or existing Industrial Ethernet or RS-232/485 data monitoring and
control networks.
The IWR-PORT can interface with standard 10/100 Base-T Ethernet
networks giving access to the standard MODBUS TCP protocol, ensuring
compatibility with most industrial automation systems.
MODBUS RTU is available when an RS-232/485 network is used.
IWTT wireless RTD thermocouple or mV input transmitter BSP 1/4"
£182.10
The IWTT Wireless Temperature Transducer is a cost effective
replacement to a traditionally wired temperature transducer that offers
the advantages of a low-cost installation in inaccessible and expensive
installation environments.
It is easily paired to any of the range of IWR receivers - thus offering
a “plug and play” solution to your pressure measurement applications.
The instrument uses either J or K type thermocouples or 3-wire RTD
sensors fitted to an acetal housing giving excellent media compatibility
for the harshest of applications. Compression fittings are available
which allow the head to be orientated in the required direction.
The IWTT sensor can be used with any of the IWR range of receivers.
A line-of-sight range of up to 500 m is possible depending on the
wireless receiver used (refer to specific receiver data sheets for further
information).
Each device is temperature compensated, calibrated and supplied with
a traceable serial number.