Wireless Transmitters
Wireless Transmitters
15 results found:
Matching categories: Wireless Transmitters
£285.00
Our Industrial IoT Starter kits are designed to give our customers a quick and easy pathway to a fully featured operational IoT System.
Kits comprise of the following parts:
IoT Gateway with wireless receiver & Cellular modem
Any 2 IWPT Wireless pressure transmitters
Access to IoT software platform
'Out the Box' quick start guide
IWPT Industrial Wireless Pressure transmitter
£235.16
The IWPT Wireless Pressure Transducer is a cost effective replacement
to a traditionally wired pressure transducer that offers the advantages
of a low-cost installation in inaccessible and expensive installation
environments.
It is easily paired to any of the range of IWR receivers - thus offering
a “plug and play” solution to your pressure measurement applications.
Each device is temperature compensated, calibrated and supplied with
a traceable serial number.
£285.00
Our Industrial IoT Starter kits are designed to give our customers a quick and easy pathway to a fully featured operational IoT System.
Kits comprise of the following parts:
IoT Gateway with wireless receiver & Cellular modem
Any 2 IWTT Wireless temperature transmitters
Access to IoT software platform
'Out the Box' quick start guide
IWTT wireless RTD thermocouple or mV input transmitter BSP 1/4"
£182.10
The IWTT Wireless Temperature Transducer is a cost effective
replacement to a traditionally wired temperature transducer that offers
the advantages of a low-cost installation in inaccessible and expensive
installation environments.
It is easily paired to any of the range of IWR receivers - thus offering
a “plug and play” solution to your pressure measurement applications.
The instrument uses either J or K type thermocouples or 3-wire RTD
sensors fitted to an acetal housing giving excellent media compatibility
for the harshest of applications. Compression fittings are available
which allow the head to be orientated in the required direction.
The IWTT sensor can be used with any of the IWR range of receivers.
A line-of-sight range of up to 500 m is possible depending on the
wireless receiver used (refer to specific receiver data sheets for further
information).
Each device is temperature compensated, calibrated and supplied with
a traceable serial number.
IWTTU RTD or thermocouple input wireless transmitter NPT 1/4"
£182.10
The IWTTU Wireless Temperature Transducer is a cost effective
replacement to a traditionally wired temperature transducer that offers
the advantages of a low-cost installation in inaccessible and expensive
installation environments.
It is easily paired to any of the range of IWR receivers - thus offering
a “plug and play” solution to your pressure measurement applications.
The instrument uses either J or K type thermocouples or 3-wire RTD
sensors fitted to an acetal housing giving excellent media compatibility
for the harshest of applications. Compression fittings are available
which allow the head to be orientated in the required direction.
The IWPT sensor can be used with any of the IWR range of receivers.
A line-of-sight range of up to 500 m is possible depending on the
wireless receiver used (refer to specific receiver datasheets for further
information).
Each device is temperature compensated, calibrated and supplied with
a traceable serial number.
£285.00
Our Industrial IoT Starter kits are designed to give our customers a quick and easy pathway to a fully featured operational IoT System.
Kits comprise of the following parts:
IoT Gateway with wireless receiver & Cellular modem
Any 2 IWT Wireless Transmitters
Access to IoT software platform
'Out the Box' quick start guide
IWTxT Wireless Transmitter with 4-20mA transmitter supply
£215.24
The IWTxT is designed to convert any standard 4-20 mA transmitter into
a wireless unit.
It works by switching on a supply to the 4-20 mA transmitter, waiting for
a suitable settling time and then sending the data to one of Sensata’s
standard wireless receiver units.
The IWTxT is specially designed to maximise battery life and in a typical
application the battery life will exceed 12 months. The data update rate
is user selectable to suit the requirement of each measured variable and
so maximize battery life.
Typical update rates include 1 second, 10 seconds, 60 seconds or 1 hour.
The system also features a signal strength reading and time since last
transmission which can be remotely monitored.
The IWTxT is designed to operate with the IWR range of receivers.
The IWR-1 can output a 4-20 mA or 1-5V signal whilst the IWR-PORT
can store up to 128 variables for transmission to an industrial Ethernet
connection or an RS-232/485 communications link.
IWDigT digital input wireless transmitter
£152.99
The IWDigT Wireless Transmitter is a cost effective alternative to
traditional wiring that offers the advantages of a low-cost installation in
inaccessible and expensive installation environments.
It is easily paired to any of the range of IWR receivers - thus offering
a “plug and play” solution to your digital switched or pulse counter
application.
The IWDigT sensor should be used with any of the IWR range of
receivers. A line-of-sight range of up to 500 m is possible depending
on the wireless receiver used (refer to specific receiver datasheets for
further information).
IWmAT mA input wireless transmitter
£152.99
The IWmAT Wireless Transmitter is a cost effective alternative to
traditional wiring that offers the advantages of a low-cost installation in
inaccessible and expensive installation environments.
It is easily paired to any of the range of IWR receivers - thus offering a
“plug and play” solution to your 4-20 mA current application.
The IWmAT sensor should be used with any of the IWR range of
receivers. A line-of-sight range of up to 500 m is possible depending
on the wireless receiver used (refer to specific receiver datasheets for
further information).
IWCTT Current Transformer input wireless transmitter
£152.99
The IWCTT Wireless Transmitter is a cost effective alternative to traditional wiring that offers the advantages of a low-cost installation in inaccessible and expensive installation environments. Operates with any Split Core current transformer which gives a mV AC output, typically 333mV.
It is easily paired to any of the range of IWR receivers - thus offering a “plug and play” solution to your current measuring application. The IWCTT sensor should be used with any of the IWR range of receivers. A line-of-sight range of up to 500 m is possible depending on the wireless receiver used (refer to specific receiver datasheets for
further information).
IWLoadT Strain Gauge and Load Cell input wireless transmitter
£152.99
The IWLoadT accepts an input from a Strain Gauge or Load Cell and transmits the value wirelessly to a suitable receiver such as the IWR-PORT.
The IWLoadT is mounted in an acetal plastic IP67 enclosure and is powered by a 3.6V lithium battery. Typical battery life at a 10s update rate would be more than 3 years. Channel number and update rate can be selected using internal DIP switches and you can choose between either an on board ceramic chip antenna or SMA connector for an external antenna.
Typical transmission ranges are 500m outdoor, 50m indoor.
IWPotT Potentiometer input wireless transmitter
£152.99
The IWPotT accepts an input from a 2 or 3 wire Potentiometer and transmits the value wirelessly to a suitable receiver such as the IWR-PORT.
The IWPotT is housed in an acetal IP67 enclosure and is powered by a 3.6V lithium battery. Typical battery life at a 10s update rate would be more than 5 years. Channel number and update rate can be selected using internal DIP switches and you can choose between either an on board ceramic chip antenna or SMA connector for an external antenna.
Typical transmission ranges are 500m outdoor, 50m indoor.
IWTaT Wireless Ambient Temperature Transmitter
£145.00
The IWTaT ambient temperature transmitter has been designed to
operate with the range of wireless receivers manufactured by Cynergy3.
Either ambient temperature alone or both temperature and humidity
measurements can be specified. Typically the unit transmits the
measured values back to a IWR-PORT which can be connected to an
Ethernet or RS-232/485 communications network. For temperature and
humidity see the IWTRhT.
The unit is specially designed to maximise battery life and in a typical
application the battery life can exceed five years.
IWTRhT Temperature & RH Wireless Transmitter
£175.50
The IWTRhT ambient temperature and relative humidity transmitter has
been designed to operate with the range of wireless receivers designed
and manufactured by Sensata.
Either ambient temperature alone or both temperature and humidity
measurements can be specified. (see IWTaT)
Typically the unit transmits the measured values back to a IWR-PORT
which can be connected to an Ethernet or RS-232/485 communications
network.
The unit is specially designed to maximize battery life and in a typical
application the battery life can exceed three years.
IWVT voltage input wireless transmitter
£152.99
The IWVT Wireless Transmitter is a cost effective alternative to
traditional wiring that offers the advantages of a low-cost installation in
inaccessible and expensive installation environments.
It is easily paired to any of the range of IWR receivers - thus offering a
“plug and play” solution to your analog voltage application.
The IWVT sensor should be used with any of the IWR range of receivers.
A line-of-sight range of up to 500 m is possible depending on the
wireless receiver used (refer to specific receiver datasheets for further
information).