Search Results
89 results found:
IWTTU RTD or thermocouple input wireless transmitter NPT 1/4"
£182.10
The IWTTU Wireless Temperature Transducer is a cost effective
replacement to a traditionally wired temperature transducer that offers
the advantages of a low-cost installation in inaccessible and expensive
installation environments.
It is easily paired to any of the range of IWR receivers - thus offering
a “plug and play” solution to your pressure measurement applications.
The instrument uses either J or K type thermocouples or 3-wire RTD
sensors fitted to an acetal housing giving excellent media compatibility
for the harshest of applications. Compression fittings are available
which allow the head to be orientated in the required direction.
The IWPT sensor can be used with any of the IWR range of receivers.
A line-of-sight range of up to 500 m is possible depending on the
wireless receiver used (refer to specific receiver datasheets for further
information).
Each device is temperature compensated, calibrated and supplied with
a traceable serial number.
2002ALMRTD Dual Trip Amplifier
£184.51
The 2002ALMRTD is a dual setpoint Trip Amplifier which can accept inputs from virtually any RTD sensor such as a PT100 and provides two alarm relay outputs.
The setpoints are adjusted using potentiometers on the front panel and can be measured using a 0-10V signal on the setpoint terminals. The power supply can be 24Vdc or 24Vac and the relay outputs are mains rated.
£42.00
The DPP30-24 is a 30W Power supply with a universal input and 24Vdc output.
The unit is housed in a compact DIN rail enclosure. The input voltage range is 90 to 264 Vac and other power options are available.
£285.00
Our Industrial IoT Starter kits are designed to give our customers a quick and easy pathway to a fully featured operational IoT System.
Kits comprise of the following parts:
IoT Gateway with wireless receiver & Cellular modem
Any 2 IWT Wireless Transmitters
Access to IoT software platform
'Out the Box' quick start guide
ISOSLICE-2 8 Channel mA or voltage input module
£224.82
The ISOSLICE-2 is an isolated input module which has eight mA or voltage input channels.
The unit has input to power supply isolation but not channel to channel isolation and connects to the E-100,Z-200 or Z-PORT modules allowing a complete I/O system to be achieved.
£331.51
Features
• 2.4GHz Wireless to USB Gateway
• Enables easy monitoring of our wireless networks using any PC
• Free of charge monitoring software allows all wireless parameters to
be viewed and logged
• Logs data to .csv file
The IWR-USB Gateway provides a link between wireless sensors and
any PC with a USB connection.
A free of charge software package allows monitoring and logging of all
the IWT wireless sensors in the network via a standard PC.
The IWR-USB saves the time-stamped data collected in a standard .csv
file for easy handling by packages such as Microsoft® Excel®.
IWTxT Wireless Transmitter with 4-20mA transmitter supply
£215.24
The IWTxT is designed to convert any standard 4-20 mA transmitter into
a wireless unit.
It works by switching on a supply to the 4-20 mA transmitter, waiting for
a suitable settling time and then sending the data to one of Sensata’s
standard wireless receiver units.
The IWTxT is specially designed to maximise battery life and in a typical
application the battery life will exceed 12 months. The data update rate
is user selectable to suit the requirement of each measured variable and
so maximize battery life.
Typical update rates include 1 second, 10 seconds, 60 seconds or 1 hour.
The system also features a signal strength reading and time since last
transmission which can be remotely monitored.
The IWTxT is designed to operate with the IWR range of receivers.
The IWR-1 can output a 4-20 mA or 1-5V signal whilst the IWR-PORT
can store up to 128 variables for transmission to an industrial Ethernet
connection or an RS-232/485 communications link.
RTD-HEAD PT100 Temperature Transmitter
£64.00
The RTD-HEAD is a low cost high accuracy 4-20mA output PT100 temperature transmitter suitable for mounting in most thermocouple heads.
The RTD-HEAD can be user configured for virtually any 2 or 3-wire PT100 sensor and temperature range, no PC software is required.
SLD67-7 Surge Protector For Process Loops
£85.00
The SLD-67-7 is typically used to provide Surge & Lightning protection to process control signals.
The -7 has a clamping voltage of 7V and a maximum discharge current of 10kA (Imax 8/20), making it ideal for thermocouples, photocells and other low voltage equipment.
A high speed version is available for protecting fast communication links.
Slimcon-6 Signal Converter with Isolation
£136.44
The Slimcon-6 Signal Converter is the ultimate low cost, high accuracy compact signal converter.
The unit is a DC powered signal converter which can accept any 4-20mA or voltage input and provide an isolated 4-20mA or voltage output.
The Slimcon-6 is housed in an ultra slim 6.4mm DIN rail enclosure saving panel space and money !
£184.51
The 2002ALMTC is a dual setpoint Trip Amplifier which can accept inputs from virtually any thermocouple or mV source and provides two alarm relay outputs.
The setpoints are adjusted using potentiometers on the front panel and can be measured using a 0-10V signal on the setpoint terminals. The power supply can be 24Vdc or 24Vac and the relay outputs are mains rated.
£30.00
The DSP30-24 is a 30W Power supply with a universal input and 24Vdc output.
The unit is housed in a compact DIN rail enclosure. The input voltage range is 90 to 264 Vac and other power options are available.
Dualcon-6 Dual Output isolating signal Converter
£275.31
The Dualcon-6 signal isolator is a dual 4-20mA or 0-10V output DC powered isolating signal converter.
The Dualcon-6 can accept virtually any input including 4-20mA loops, voltage inputs, thermocouples, PT100 sensors and potentiometers and provide two isolated 4-20mA or Voltage outputs.
The Dualcon-3 is also available if a AC power supply is required.
ISOSLICE-3 4 Channel RTD input module
£224.82
The ISOSLICE-3 is an isolated input module which has four RTD input channels.
The unit has input to power supply isolation but not channel to channel isolation and connects to the E-100,Z-200 or Z-PORT modules allowing a complete I/O system to be achieved.
IWR-1 Single Channel Wireless Receiver
£184.14
The IWR-1 is a single channel receiver designed to pair with any of our range of IWT wireless transmitters to form a cost effective alternative to traditional wired systems.
This offers a low cost solution to inaccessible or expensive installation environment.
The receiver has a user selectable voltage or mA output corresponding
to the calibrated range of the remote Wireless Transducer and 5A rated
changeover contacts for alarm functionality.
User configuration is possible, however the single channel transmitter/
receiver combination is designed to work ‘out of the box’ offering a
simple plug and play solution to remote measurement applications.
With the standard 0dBI antenna, a line-of-sight range of up to 500 m
can be achieved and, using the optional 3dBI antenna, up to 750m (LOS)
is achievable.
TC-HEAD thermocouple Transmitter
£64.00
The TC-HEADis a low cost high accuracy 4-20mA output thermocouple transmitter suitable for mounting in most thermocouple heads.
The TC-HEAD can be user configured for virtually any thermocouple type and range, no PC software is required.
20-ALM Loop Powered Trip Amplifier
£100.77
The 20-ALM is a unique loop-powered trip amplifier which can be wired into any 4-20mA loop and provide a single N.O or N.C alarm relay output.
The setpoint is set using a front panel potentiometer and can be checked by measuring a 0-1V signal on the setpoint terminals. Two relay types are available, one suitable for DC voltage switching and the other for switching higher AC voltages.
£52.00
The DPP50-24 is a 50W Power supply with a universal input and 24Vdc output.
The unit is housed in a compact DIN rail enclosure. The input voltage range is 90 to 264 Vac and other power options are available.
FREQCON Frequency to Analogue Converter
£212.43
The FREQCON-6 converter can convert virtually any frequency type input into an isolated 4-20mA or Voltage output. Any frequency between 0 and 250kHZ can be converted and almost any input voltage level can be read.
ISOSLICE-4 Four Channel thermocouple input module
£308.57
The ISOSLICE-4 is an isolated input module which has four thermocouple input channels.
The unit has input to power supply isolation and channel to channel isolation and connects to the E-100,Z-200 or Z-PORT modules allowing a complete I/O system to be achieved.
IWDigT digital input wireless transmitter
£152.99
The IWDigT Wireless Transmitter is a cost effective alternative to
traditional wiring that offers the advantages of a low-cost installation in
inaccessible and expensive installation environments.
It is easily paired to any of the range of IWR receivers - thus offering
a “plug and play” solution to your digital switched or pulse counter
application.
The IWDigT sensor should be used with any of the IWR range of
receivers. A line-of-sight range of up to 500 m is possible depending
on the wireless receiver used (refer to specific receiver datasheets for
further information).